PS 1/2 Traditional Anchor



The FIXE Traditional Anchor is designed for any type of route. When placed in good rock, the anchor simultaneously loads both bolt placements. The design locates the anchor bolts in a vertical orientation. This will eliminate the “Shock Load” possibility if one anchor bolt were to fail. This design is far superior to anchors that locate the anchor bolts across a horizontal plane.

Fixe does not recommend outdoor use of this anchor. If you choose to use plated steel outdoors, use only in arid and low-corrosive environments.


WARNING for California customers: Cancer and reproductive harm. For more info please visit


Fixe Hardware
Mfg Sku/Part Number:
4950 lbs / 22kn CE/UIAA Certified
Ecotri zinc plated steel
3.5mm Stock (hanger)
10mm Stock (ring)
1/2-inch / 12.8mm bolt hole
Other Features:
  • Rounded inner edge for less wear on carabiners
  • Optimized surface area contact with the rock
  • Made in Barcelona, Spain
  • Geometry: When placed on a roof, the carabiner will be routed so that it never comes into contact with the projecting head of the bolt anchor.
  • Conical Washer: The rim of the bolt anchor hole protrudes slightly into a conical shape, away from the wall. The act of pulling the bolt anchor will generate a spring effect that provides constant pressure against the wall, multiplying the strength of the torque. It also provides more consistency when torque tightening the bolt.
  • Anti-rotation Pins: Textures on the hanger help to reduce the likelihood of the hanger spinning.
  • Ecotri zinc plated steel (Replacing bichromate steel): Perfect for equipping indoor sport facilities such as gyms and climbing walls. Its manufacturing process is characterized by low emission of residues and increasing its resistance to corrosion. 8 microns of zinc coating (free of chromium-6) is applied and finished with an organic seal. With three treatments a higher resistance to corrosion is achieved (96h white corrosion + 360h red corrosion) and the resistance to thermal shock (200ÂșC) is also incorporated.
  • Lighter: With a thickness of 3.5mm (previously 4mm) Fixe has reduced the weight of the hanger by 12.5% while still being one of the most robust hangers on the market.
  • Fixe does not recommend for outdoor use: If you choose to use plated steel outdoors, use only in arid and low corrosive environments.

Recommended Accessories