Phantom Alpine Quickdraw (Fall 2022)
Super-light yet durable 60cm draw
I-Beam construction brings each Phantom carabiner's weight down to just 28 grams. Low weight doesn't mean no frills: the Phantom has a reduced gate notch to combat snagging, and more metal in contact areas for reduced wear on equipment. Connected with a lightweight Dynatec sling, the Phantom quickdraw is a high performance trad onsight tool.
The Phantom Alpine quickdraw features an 8mm 60cm Dynatec sling.
Mfg Sku/Part Number:
Gate opening: 21 mm
EN 12275:2013 B, EN 566:2017
Super-light quickdraw for minimum weight
Super-light carabiners are mounted on Dynatec to create quickdraws that minimize weight. These quickdraws are suitable for alpine climbing, trad on-sighting, and any other scenario where minimum weight is desirable.
Small gate notches reduce snagging on equipment
Carabiners with wire gates need a gate notch to achieve their full strength rating. The notches on these carabiners are as small as possible while remaining functional, reducing the chance of them snagging on other equipment.
Wire gate carabiners reduce weight
Wire gates are the lightest gate type available, and are appropriate for trad, alpine and winter climbing, where minimal weight is desirable. They are less likely to freeze and clog with ice than solid gate carabiners, making them ideal for winter and alpine climbing.
I-Beam carabiner construction gives optimum strength to weight ratio
I-Beam construction techniques allow carabiners to be lighter without compromising strength. This is achieved through hot forging, a process which allows metal to be made into complex shapes that improve functionality.
Contrasting carabiner colors identify rope and gear ends of quickdraw
Contact with wires and bolts can mark a carabiner with sharp edges that might be harmful to ropes. The carabiners on DMM quickdraws are differentiated by color, allowing you to consistently use the same end for either protection or ropes.