Technical specifications & features
|Weight||1.9 lbs (864 g)|
|Mfg Sku/Part Number||22002|
|Closeout Season||Fall 2017|
|Dimensions||5.8 x 1.5 x 5.25 in (14.7 x 3.8 x 13.3 cm)|
|Other Features||Battery Capacity: 98Wh, 8800mAh (11V)
Power Output: USB, 12V, AC*
Recharge by: AC, 12V, Solar
Ideal for: Tablet, Laptop, DSLR Camera, Lights
*required inverter: sold separately
• Wall Charger (45W): 3 hours
• Car Charger (30W): 4 hours
• Nomad 13 Solar Panel: 15-30 Hours
• Nomad 20 Solar Panel: 10-20 Hours
• Cell Type: Li-NMC
• Pack Capacity: 98Wh (11V, 8,800mAh)
• Single Cell Equivalent Capacity: 26,400mAh @3.7V
• Lifecycles: hundreds of cycles
• Shelf-life: Keep plugged in, or charge every 3-6 months
• Fuses: 20A, user replaceable fuse
• Management system: Charging and low-battery protection built-in
• LED (output): 100mW, white LED
• USB port (output): 5V, up to 2.1A (10W max), regulated
• 6mm port (output, 6mm, green, hexagon): 12V, up to 10A (120W max), regulated
• laptop port (output, 7.4mm, orange, square): 19V, up to 6A (120W max), regulated
• sidecar port (chain, 9mm): 9-13V, up to 10A (120W max)
• AC inverter US (output, sold separately): 110V, up to 0.9 (100W max), 60Hz, modified sine wave
• AC inverter Int. (output, sold separately): 220V, up to 0.45A (100W max), 50Hz, modified sine wave
• charging port (input, 8mm, blue circle): 14-22V, up to 3A (45W max)
• Product SKU: 22002
• Chainable: Yes
• UV Coated to prevent scratches
• Operating usage temp.: 32-104 F (0-40 C)
• Certs: CE, FCC, ROHS
There are 3 ways to charge your Sherpa 100:
-- The Sun
The Sherpa 100 can be charged by connecting a compatible solar panel. For best experience, we recommend two Nomad 20 Solar Panels (see the chart below for solar compatibility).
The Sherpa 100 can be charged by being plugged into a regular wall outlet.
The Sherpa 100 can also be charged by plugging into your car 12V adapter.
FREQUENTLY ASKED QUESTIONS
Q: How do I know if it is turned on?
A: Push the power button below the LCD batter monitor and it will light up.
Q: How do I know if I have a full charge?
A: The LCD battery monitor displays charge level in 20% increments. If all areas are shaded and the top segment says "Full" then it is charged up and ready to go.
Q: Is the Sherpa 100 waterproof?
A: No. Although the Sherpa 100 is durable, you will want to protect it from elements. Make sure the ports are dry before using the device.
Q: Can I take the Sherpa 100 on an airplane?
A: Yes, the Sherpa 100 meets all requirements for carry-on and is perfect for keeping your devices charged on long flights. Please check with airline for current regulation.
Q: How long can the Sherpa 100 hold its charge?
A: It can hold its charge for several months. However, to keep the battery healthy and ready to go, we recommend that you leave your Sherpa 100 plugged in between uses. If this is not possible, charge it every 3-4 months.
Q: What type of battery is used in the Sherpa 100?
A: Lithium-ion NMC. It has these advantages: stores more energy; smaller and lighter watt for watt; and retains its charge even after months of storage.
Q: Can I chain multiple Sherpas together?
A: Yes. You can chain two Sherpas together through the sidecar port. See video for details.
Q: Why did the Sherpa 100 turn off automatically?
A: The Sherpa 100 has a built-in feature that turns the unit off after a period of inactivity. This saves power. To override this mode and keep it in "always on" mode, simply hold down the power button for about 10 seconds. A small "ON" icon will appear in the upper left side of the LCD battery monitor if you are in "always on" mode. In this case, it will only turn off if it runs out of power or you turn it off.
Related Blog Posts
- Similar Products